Note: The maximum range of two-wire system is within 15m.
The standard configuration is DC24V, Optional AC220V, AC220V only has four-wire system. We can customize DC12V or solar power.
By default we send two-wire system within15m range.
The standard probe material is ABS, PVFD anti-corrosion probe, add USD35.00.
The Standard configuration 4-20mA output, The four-wire system can add the below output:
RS485, add USD20.00
RS232, add USD20.00
Relay, add USD20.00
The Ultrasonic level meter is instrument of measured material level,
which is non-contact, high reliability, cost-effective, easy to install and
maintain. It meets the requirements of material level without the contact and
owns the independent property rights with development for many years by
our company.
The Ultrasonic Level Meter with Chinese and English menu and simple
set, can meet different requirements from customer. Normally, after followed
installation instruction, then set several parameters, it will start to work.
Our products can be debugged through three keys on the panel. Then, the
measured value is showed by LED.
Technical data:
|
Function
|
Integrated type
|
Split type
|
|
Range
|
5m、10m、15m、20m、30m、40m、50m、60m
|
5m、10m、15m、20m、30m、40m、50m、60m
|
|
Accuracy
|
0.25%-0.5%
|
0.25%-0.5%
|
|
Resolution
|
3mm or 0.1%（bigger）
|
3mm or 0.1%（bigger）
|
|
Display
|
Chinese and English LED
|
Chinese and English LED
|
|
Analog Output
|
Four-wire 4～20mA/510Ωload
Two-wire 4～20mA/250Ω load
|
4～20mA/510Ωload
|
|
Relay Output
|
Two groups:
AC 250V/ 8A or DC 30V/ 5A
Status can be programmed
|
Two groups for single channel
Four groups for double channels
AC 250V/ 8A or DC 30V/ 5A
Status can be programmed
|
|
Power supply
|
Standard:24VDC
Optional: 220V AC+15% 50Hz
|
Standard:220V AC+15% 50Hz
Optional:24VDC or 120mA
Customize:12VDC or battery
|
|
Environment
Temperature
|
LED : -20～+60℃，
Probe : 20～+80℃
|
LED : -20～+60℃，
Probe : 20～+80℃
|
|
Communication
|
Option:485,232 Communication
(manufactures agreement)
|
Option:485,232 Communication
(manufactures agreement)
|
|
Protection Grade
|
LED: IP65，
Probe: IP68
|
LED: IP65，
Probe: IP68
|
|
Cable Probe
|
No
|
standars:10m longest:100m
|
|
Probe installation
|
According to the range and the probe type
|
According to the range and the probe type
|
|
Power Consumption
|
Split type
Power supply:24V,
No relay: 100mA
Channel 1 of Relay: 120mA；
Channel 2 of Relay: 145mA；
Channel 3 of Relay: 170mA；
Channel 4 of Relay: 190mA；
The specific power is as follows:
No relay: 24×100mA=2.4W；
Channel 1 of Relay: 24×120mA=2.9W；
Channel 2 of Relay: 24×145mA=3.5W；
Channel 3 of Relay: 24×170mA=4.1W；
Channel 4 of Relay: 24×190mA=4.6W；
|
|
Power Consumption
|
Integrated type(four-wire system)
Power supply:24V,
No relay: 80mA
Channel 1 of Relay: 105mA；
Channel 2 of Relay: 130mA；
The specific power is as follows:
No relay: 24×80mA=1.9W；；
Channel 1 of Relay: 24×105mA=2.5W；
Channel 2 of Relay: 24×130mA=3.1W；
|
|
Power Consumption
|
Integrated type(two-wire system)
Power supply:24V,
No relay: 30mA
The specific power is as follows:
No relay: 24×30mA=0.72W
|
Note:
Ultrasonic probes can also be customized according to customer need in
this series: high pressure and high temperature resistant, light, small
diameter, small blind area and other special regulatory probes.
